Filter
Top Products
5
CONNECTIONS
Caution:
Do not plug in the power
cord until all other connections are
complete.
CONNECTING ANOTHER
AUDIO SOURCE TO THE
INPUT JACKS
You can connect another audio
source (such as a stereo VCR or CD
player) so you can sing along with the
audio source’s sound. Connect the
source’s stereo audio output jacks to
the system’s
AUX IN L
and
R
jacks.
Note:
If your audio source does not
have AUX OUT L and R jacks, but has
only a headphone jack (such as on a
portable tape or CD player), use a
shielded Y-adapter cord with phono
jacks on each end (such as Cat. No.
42-2475). Connect the single-plug end
to the audio source’s headphone jack,
and connect the other end’s two
phono plugs to the system’s
AUX IN L
and
R
jacks.
CONNECTING AN AUDIO
COMPONENT TO THE
OUTPUT JACKS
You can connect an audio component
(such as a PA system amplifier) to the
system’s
AUX OUT L
and
R
jacks. The
AUX OUT L
and
R
jacks let you hear
the system’s sound through the com-
ponent.
CONNECTING AN
EXTERNAL SPEAKER
You can connect an external 20-watt
stereo speaker with 8-ohm impedance
to the system’s
EXT. 8OHM SPEAKER
jack for stereo effect.
32-1159.fm Page 5 Monday, August 9, 1999 2:38 PM