Filter
Top Products
19
TAPE TIPS
Erasing a Cassette Tape
1. Set
AUX/TAPE
to
TAPE
.
2. Load the tape you want to erase into
TAPE 1.
3. Press
POWER
.
4. Press
RECORD
on TAPE 1.
RECORD
and
PLAY
both lock down
and the tape records silence.
5. When the system finishes recording
over the portion of the tape you want
to erase, press
STOP/EJECT
on
TAPE 1.
RECORD
and
PLAY
release.
You can quickly erase both sides of a
cassette tape using a bulk tape eraser,
such as Cat. No. 44-232.
Notes
:
• To record over a cassette tape, sim-
ply record as usual. The system
records over the previous recording.
• Before erasing a tape, be sure its
erase-protection tabs are in place
(see “Preventing Accidental Era-
sure”).
Preventing Accidental Erasure
Cassette tapes have two erase-protec-
tion tabs — one for each side. When a
tab is in place, you can record on that
side. To protect a recording from being
accidentally recorded over, use a
screwdriver to remove one or both of
the cassette tape’s erase-protection
tabs. This prevents
RECORD
from being
pressed.
If you later decide to record on a tape
side after you have removed the erase-
protection tab for that side, place a piece
of strong plastic tape over that side’s
erase-protection hole. Be sure you cov-
er only the hole originally covered by the
erase-protection tab.
Caution:
Removing the erase-protec-
tion tabs does not prevent a bulk eraser
from erasing a cassette tape.
32-1162.fm Page 19 Monday, August 9, 1999 3:01 PM