Filter
Top Products
Optional Multi-Input Module
The left side of this double-module provides four stereo inputs
which are summed together creating a stereo sub-mix. The
right side takes that mix and processes it as a stereo source into
the Vx. The right side (called Multi Master) is similar to a reg-
ular Vx Stereo Input module, except that the Input Gain pot
and switches are replaced by a mix trim stereo level control.
Panel controls (each of four identical inputs)
MIC input selector
for the L & R Input XLRs. The default (with the switch
released) is Line Input sensitivity and gain.
+48V phantom power ON-OFF switch
for the input XLRs. Active only when MIC source selected.
PAD switch
for introducing 15dB attenuation between the XLRs and the
preamp.
GAIN dual- concentric control pair
for the stereo preamp.
ON-OFF switch with indicator
for the preamp output to the stereo sub-mix.
L & R assign switches
for the preamp output to the stereo sub-mix.
For normal Stereo output release both switches. Use either L or
R alone to send one side of the input to both sides of the mix.
Select both switches for a mono mix of both inputs to the
stereo mix.
SIGNAL indicators
for L & R audio, bi-color indication: normal level = green;
overload = red.
PFL switches with indicators
for the L & R inputs.
Rear panel connections
Insrt Snd (Left/Right)
This balanced 1/4" TRS jack allows for the Left and Right
multiple input module output signals to be sent to effects or
signal processors.
Insrt Rtrn (Left/Right)
This balanced 1/4" TRS jack allows for the return of the effect-
ed and/or processed signal back into the multiple input module.
Bal Input (L/R) A, B, C, D
These balanced XLR connectors accept input signals for the A,
B, C, and D stereo inputs of the multiple input module.
CENTURY SERIES
VX
PAGE 17