Filter
Top Products
Vx Master Section
Comprises four modules and is the control center for the Vx
console. Stereo Aux In, Monitoring, Solo, Talkback, Stereo
Program In, Master Aux & Matrix, internal oscillator & Scene
Muting functions are controlled here.
LEFT/RIGHT Modules
Stereo Aux In HF Level
Upper-band fixed frequency (10kHz) EQ that affects the asso-
ciated Stereo Aux in channel.
Stereo Aux In LF Level
Lower-band fixed frequency (80Hz) EQ that affects the associ-
ated Stereo Aux in channel.
Stereo Aux In LEV Control
Controls the level of the Stereo Aux In audio.
Stereo Aux In MUTE Switch w/LED
Turns off the audio assigns to the main mixes
Stereo Aux In MONO Switch
Assigns the audio to the Mono bus.
Stereo Aux In L+R Switch
Assigns the stereo audio to the main L+R mixes, L to L, R to
R.
Stereo Aux In SIGNAL LEDs
Bi-color LED lights green at normal output levels, red indi-
cates an overload condition. Responds to audio in both L&R
channels, and pre and post level control.
Stereo Aux In SOLO Switch w/LED
Allows SOLO monitoring of the associated Stereo Aux In sig-
nal. Choice of PFL or AFL.
Auxiliary Output MUTE w/LED
Mutes the respective auxiliary XLR output. In addition the
Aux Scene Mute Master facility allows a number of auxes to
be muted at the same time. The mute LED indicates the audio
status and responds to both controls. Refer to the Special
Facilities section for more about Aux Scene Mute.
Aux Master LEV Control
Controls final output signal level of the auxiliary output.
Aux Master GLOBAL PRE Switch
w/LED
This switch changes all Aux sends on input modules for the
associated Aux bus to be Pre-Fader or Post-Fader. Up=Pre,
Down=Post. The associated LED is green in color.
AUX OUT LED
Bi-color LED lights green at normal output levels, red indi-
cates an overload condition.
Aux SOLO Switch w/LED (green)
Solo monitoring facility for the AUX mix. Choice of PFL or
AFL.
AUX MUTE ACTIVE LED
Indicator for the Aux Scene Mute facility. Illuminates when
the Aux Scene Mute Master switch has been selected.
L/R/MONO MUTE Switch w/LED
Mute outputs of Left, Right & Mono signals respectively.
MONO Switch w/LED
Assign the Left and Right signals to the Mono output.
MATRIX POST Switch w/LED
Switches the source of Left, Right and Mono matrix feed sig-
nals between pre and post-fader.
L/R PEAK/SIG LED's
The red LED lights 3dB before clipping point and responds to
pre and post fader levels. The varying intensity of the green
LED displays the level of the mix bus audio.
SOLO Switch w/LED
Solo monitoring of the L, R or Mono Output. Choice of PFL or
AFL source.
Fader
100mm linear analog fader for control of the output level to
XLR, matrix and Solo AFL.
Not Shown:
Left, Right & Mono Insertion points.
Left, Right & Mono Meters.
MONO Module
Lamp Dim Control
Controls the intensity of the lighting devices plugged into the
XLR sockets on the back of the meter bridge.
Power Indicators
These four LED’s indicate the status of the incoming DC.
Stereo Program In Gain
Adjusts the gain of the Stereo Program In signal.
Stereo Program In EQ
Two-band fixed frequency (10kHz and 80Hz) EQ that affects
the Stereo Program
AUX 1&2, 3&4, 5&6, 7&8 Levels
These rotary faders controls the amount of Stereo Program sig-
nal sent the respective Aux buses. Normally Left signal is sent
to the odd Aux buses, while Right signal is sent to the even
Aux buses. Refer to Special facilities for more information.
Stereo Program Balance
Provides adjustment of the image position.
Stereo Program Assignments
Assigns the Stereo Program to the Mono and Left/Right buses.
Stereo Program Mute w/LED
Mutes the output of the Stereo Program.
Stereo Program Level
Controls final output signal level of the Stereo Program.
Stereo Program SIG/PEAK LED
The red LED lights 3dB before clipping point and responds to
pre-fader levels. The varying intensity of the green LED dis-
plays the level of the audio. Both LEDs respond to the sum of
L&R audio.
VX
PAGE 21
CENTURY SERIES