Filter
Top Products
p.127
microprocessor muting system
features
mute controller
E—SINGLE SCENE
There are nine
MUTE sources available from the MUTE CONTROLLER
:the eight
MANUAL MUTE SCENES H, and the
MICRO SCENE
G. Normally any or all of
these nine sources can be active at-one-time, which allows the operator
to combine different mute patterns. The
SINGLE SCENE switch, when
depressed,permits only one of the nine-sources to be active at-one-time.
F—
MICRO UTILITY
This latching switch will put the system into UTILITY mode.The operator
can then access and view the various parameters and functions of the con-
troller using the
UP/DOWN buttons A and the DISPLAY
B.
G—
MICRO SCENE This switch activates the SEQUENCED SCENE (PATCH).
The
DISPLAY B shows which of the 128 possible SCENES are active.
H—
MANUAL MUTES These eight switches activate the associated
MANU-
AL MUTE SCENE.Additionally,these switches,along with G,select which MUTE
SCENE
is being edited when in EDIT/PREVIEW mode.
I—
RECALL
(NEXT) Each press of this switch increments the SEQUENCED
MUTES
by one, the DISPLAY B will reflect this.Also used to activate the dis-
played scene when an
UP/DOWN A button was used to scroll to a new
scene.In this case,an
*
will be displayed as the first-character in the display
to indicate that the displayed number is not currently the active scene.
Pressing
RECALL will put that displayed SCENE into place and clear the
*
from the display.
All of these actions
will take place, but
the displayed
SEQUENCED
SCENE
will not be active
(mutes not enabled)
—unless the
MICRO SCENE
switch G is lit.
+
7