Filter
Top Products
p.53
group HS module
group
/
aux level features
signal/peak LED’s
This dual color LED
responds to the pre-fader signal. It illuminates
green with varying brightness in proportion to the audio signal.When the
signal approaches clipping,either pre or post fader,the
LED illuminates red.
talk to—fader 1–8
This switch adds the TALKBACK system output to the fader signal.The
level of the
TALKBACK signal is set by the TALKBACK level control in the MAS-
TER section.
fader
The fader normally controls the level at which the GROUP signal is sent to
any assigned buses or outputs. When the
REVERSE AUX
/GROUP switch is
selected, the fader controls the level of the
AUX output.
solo
Pressing this switch will include or exclude the fader signal from the
console's
SOLO system.
see—master module, solo control system
LED
3