Filter
Top Products
p.63
group RT module
external tape input assignment features
Each of the eight
GROUP sub-modules includes a TAPE-IN section, although
this section is not directly associated with the
GROUPS.
Its function is to provide a line return (or input) that can be assigned to
the left, right and mono outputs.
These inputs also act as the source for the
AUX SENDS 5–8 section located
directly below the
TAPE-IN section.
level
This control sets the signal level brought in through the TAPE-IN jack
on the rear panel.
pan
When the TAPE-IN L/R assignment switch is depressed,the PAN control
is used to position the signal within the stereo field.
mono assignment
The TAPE-IN signal is assigned to the discrete mono bus.
left/right assignment—L/R
The TAPE-IN signal is assigned to the main left and right output buses.
solo
Pressing this switch will include (illuminated) or exclude (not illumi-
nated) the
TAPE-IN signal from the console's SOLO system.
see—master module, solo control system
4