Filter
Top Products
p.55
group HS module
rear panel features
group output
This balanced male XLR connector carries the GROUP
output signal.
see—group fader,front-panel description
group insert point
Separate 1/4" TRS jacks provide the ability to insert an external signal
processor into the signal path of the
GROUP.
group insert send
This output connects to the input of an external signal proces-
sor. The signal is derived after the group-summing amplifier.
This output is ground compensated.
group insert return
This balanced input accepts a signal from the output of an
external signal processor. It accepts either balanced or unbalanced signals.
Plugging a 1/4" plug
into this jack does not
break the internal signal
flow of the Group.
+
Plugging a 1/4" plug
into this jack breaks
the signal flow
of the Group.
+
3