Peavey XR 696F Music Mixer User Manual


 
10
Effects Section
16
17
18
19 20 21
22 23
16. Store: This button enables you to store a custom effects setting to one of four preset locations (Store 1–Store 4).
Start with one of the twelve presets provided. Adjust the two parameter controls (Time/Size and Color/Tone) to your
desired settings. When you are satisfied with the new settings‚ push the Store button once. The corresponding LED
will start blinking. Now‚ twist the Preset Selector knob to one of the four locations provided and push the Store
button again. This action stores your settings and the LED stops blinking. When recalling any one of these four user-
defined locations‚ keep in mind that the parameter settings are stored internally and may differ from where the
actual knobs are physically set.
17. Store LED: This yellow indicator blinks to indicate that you are in the Store mode. (See the above paragraph.)
18. Effects Peak LED: This red LED illuminates to indicate 6 dB of headroom before the signals being sent to the
effects circuit are clipped. Ideally‚ you want this LED to light only occasionally. An occasional blink indicates that
your levels are set optimally. Listen carefully to the output to determine the final setting.
Preset Name Time/Size Color/Tone
1 Plate Rev Time Damping (High Frequency)
2 Spring Rev Time Damping (High Frequency)
3 Room Rev Time Damping (High Frequency)
4 Room Rev2 Time Damping (High Frequency)
5 Hall Rev Time Damping (High Frequency)
6 Lg Hall Rev Time Damping (High Frequency)
7 Short Dly Time: 40–1100 ms Feedback: 0–50%
8 Long Dly TIme: 150–4000 ms Feedback: 0–50%
9 Chorus Rate Depth: Best Set Full CCW
10 Rvb/Dly1 Time Dly Time: 100–950 ms
11 Rvb/Dly2 Time Dly Time: 100–950 ms
12 Rvb/Dly3 Time Dly Time: 100–950 ms
13 Store4 User-defined location
14 Store3 User-defined location
15 Store2 User-defined location
16 Store1 User-defined location