Peavey XR 696F Music Mixer User Manual


 
8
12
14
15
13
Channels 7–8
Channel 9
12. Right Input: High impedance 1/4" input for line-level signals. The Right Input
is adjusted by the Gain control. If the XR 684F/XR 696F is in Left/Right mode‚
the signal will go the Right Speaker Output. In Main/Mon mode‚ the signal is
combined with the Left Input and placed on the main speaker out. The right
signal can also be patched out of the mixer via the right output jack to
external components such as effects‚ power amps and recording devices.
13. Left/Mono Input: High-impedance 1/4" input for line-level signals. The
Left/Mono input supplies signal to both the left and right channels if there
is nothing inserted in the Right Input jack. If you’re running stereo (Left/Right
mode) and are using the Right Input‚ the signal will go to the Left Speaker
Output. But‚ only if you have something inserted in the Right Input jack. In
Mon/Main mode‚ the signal is combined with the right and placed on the
Main Speaker Output.
14. Line In: This stereo pair of RCA phono jacks accepts a stereo input (nominally -10 dBV)
from the output of a tape deck‚ CD player or other similar device. The signal is placed on
the Left and Right channels as well as the monitor mix.
15. Line Out: This stereo pair of RCA phono jacks provides a signal for the recording inputs of
a stereo tape‚ CD player or other similar device.
CAUTION: DO NOT HOOK THE LINE IN AND LINE OUT TO THE INPUTS AND
OUTPUTS OF THE SAME DEVICE. DOING SO WILL FORM A LOOP THAT CAN
CAUSE SEVERE FEEDBACK. USE SEPARATE DECKS FOR RECORDING AND
PLAYBACK.