Filter
Top Products
11
BEFORE USING (PART NAMES AND FUNCTIONS)
24. Cross fader assign B indicator (B)
Lights green when power is ON.
25. Channel fader slider
Adjusts volume of each channel.
(Adjustable range: –∞ to 0 dB)
Outputs according to the channel fader curve set by the
CURVE ADJUST dial (CH FADER).
Master output control section
26. MASTER fader slider
Adjusts the volume of the master output.
(Adjustable range: –∞ to 0 dB)
The master output is the combination of the channel whose
audio has been set to [THRU] by the CROSS FADER
ASSIGN switch, together with the audio passed through
the cross fader and the audio from the main microphone
(depending on the mode, RETURN input will also be
added).
27. MASTER BALANCE dial
Adjusts the L/R channel balance of the master output,
booth monitor output, recording output, and digital output.
28. MASTER LEVEL indicators (L, R)
Displays output levels of the L channel and the R channel.
Each segment provides 2 seconds of peak hold.
29. MASTER ISOLATOR button/indicator (ON)
Turns master isolator function ON/OFF.
The isolator function operates with respect to master
output 1, master output 2, booth monitor output, recording
output and digital output.
Turns off when OFF, and lights when ON.
30. MASTER ISOLATOR high-range sound adjust
dial (HI)
Use to adjust the high-range sound of the master output
signal.
(Adjustable range: –∞ to +6 dB)
31. MASTER ISOLATOR mid-range sound adjust dial
(MID)
Used to adjust the mid-range sound of the master output
signal.
(Adjustable range: –∞ to +6 dB)
32. MASTER ISOLATOR low-range sound adjust dial
(LOW)
Used to adjust the low-range sound of the master output
signal.
(Adjustable range: –∞ to +6 dB)
Booth monitor control section
33. BOOTH MONITOR equalizer high-range sound
adjust dial (HI)
Used to adjust the high-range sound of the booth monitor
output signal.
(Adjustable range: –6 dB to +6 dB)
34. BOOTH MONITOR equalizer low-range sound
adjust dial (LOW)
Used to adjust the low-range sound of the booth monitor
output signal.
(Adjustable range: –6dB to +6 dB)
35. BOOTH MONITOR LEVEL adjust dial
Adjusts the volume of the booth monitor output.
Adjustable regardless of setting of master fader.
(Adjustable range: –∞ to 0 dB)
Headphone output section
36. Headphone output selector switch
(HEADPHONES — MONO SPLIT/STEREO)
MONO SPLIT:
The audio source selected by the headphone CUE button is
output from the left channel, and the master audio is
output from the right channel (Only when MASTER is
selected with the headphone CUE button).
STEREO:
The selected audio is output in stereo.
37. Headphone MIXING dial (HEADPHONES MIXING)
When turned clockwise (MASTER direction) the master
output audio is output (only when MASTER is selected with
the headphone CUE button); when turned counterclockwise
(CUE direction), the audio output will be a mixture of the
sound from the channel selected with the headphone CUE
button, and the sound coming from the external effector
(RETURN).
38. Headphone LEVEL adjust dial
(HEADPHONES LEVEL)
Adjusts the output volume of the headphone connector.
(Adjustable range: –∞ to 0 dB)
39. Headphone jack (PHONES)
SEND/RETURN section
40. SEND/RETURN type selector switches
Use to switch between the sending stage (SEND) and input
stage (RETURN) for signals when connected to an external
effector (P.14).
[Pre-Insert type]
[Post-Insert type]
Input
EQ
CH
FADER
CROSS
FADER
MASTER
FADER
SEND
RETURN
S/R ON S/R LEVEL
Output
Input
EQ
CH
FADER
CROSS
FADER
MASTER
FADER
SEND
RETURN
S/R ON S/R LEVEL
Output