Filter
Top Products
7
BEFORE USING (CONNECTIONS)
CONNECTING TO THE EFFECTOR AND OUTPUT CONNECTORS
Master output
There is an XLR plug correspondent balanced output MASTER 1,
and a RCA plug correspondent unbalanced output MASTER 2. Set
the output level using the MASTER ATT. dial to match the input
sensitivity of the connected power amplifier.
Booth monitor output
Unbalanced output supporting Ø6.3 mm phone plug. Volume can
be adjusted with the BOOTH MONITOR dial (LEVEL), regardless of
the setting of the MASTER fader.
Recording output
Output connectors for recording, supports RCA plug.
Digital output
Coaxial digital output connector, supports RCA plug. Sampling
frequency can be selected (96 kHz/48 kHz) in accordance with
connected device.
MIDI CONNECTORS
MIDI (Musical Instrument Digital Interface) is a unified standard for transmitting data between electrical musical instruments and
computers.
Data can be transmitted between devices with MIDI connectors using a MIDI cable.
The DJM-1000 can send operating data to external MIDI devices using the MIDI protocol.
* 0-127 MIDI data is output by operating the cross fader.
* When using the visual link function, MIDI data is not output.
MIDI OUT
INPUTOUTPUT
POWER
VISUAL
(MONO)
(MONO)
(MONO)
L
L
L
R
R
L
R
R
2 RETURN 1
EFX 1EFX 2
CONTROL SOUND 1
2 SEND 1
SIGNAL GND.
PHONO
LINE
(MONO)
L
R
LINE
(MONO)
L
R
LINE
(MONO)
L
R
LINE
1
SIGNAL GND.SIGNAL GND.
L
R
CONTROL SOUND 2
PHONO
2
L
R
CONTROL DIGITAL
PHONO
3
L
R
CONTROL DIGITAL
PHONO
4
L
R
CONTROL DIGITAL
PHONO
5
L
L
L
BOOTH
R
R
L
R
R
48k 96k
fs(Hz)
CONTROL DIGITAL
DIGITAL OUT
PHONO
MASTER 1
MASTER 2
REC
SUBMIC SUBMIC
CD / LINE CD / LINE CD / LINE CD / LINE CD / LINE CD / LINE
6
MASTER ATT.
–12dB
–6dB
–3dB
0dB
3
COLD
12
GND
HOT
OFF
ON
(TRS)
AC IN
L R
LR
MASTER
ATT.
48k/96k
Power amplifier
(RCA plug input connector)
Cassette deck, etc.
(analog input recording device)
External effector (2)
External effector (1)
Power amplifier
(XLR plug input
connector)
Digital input AV amplifier
(Digital input
recording device)
Power amplifier
(For booth monitor)
DJM-1000 control MIDI control code MIDI control name MIDI Channel
Cross fader operation CC11 Expression 1
External effector
Use a cable with Ø6.3 mm phone plugs to connect the DJ mixer’s
SEND connectors to the input connectors of an external effector.
When using a monaural input effector, connect only the L channel
output. In this way, the mixed L/R audio signal will be sent to the
effector.
In the same way, use a cable with Ø6.3 mm phone plugs to
connect the DJ mixer’s RETURN connectors to the output
connectors of the external effector.
When the effector has only monaural output, connect the L
channel input only. In this way, the signal from the effector will be
input to both L/R channels.