Filter
Top Products
TROUBLESHOOTING
65
En
English
A large amount of noise is
generated when playing back a
certain disc or discs. Playback
halts unexpectedly.
• Disc is seriously warped or scratched. • Replace with new disc.
• Disc is unusually dusty or dirty. • Wipe away dust or dirt from disc.
Track won’t load during
playback.
• LOAD LOCK is set to ON. • Use UTILITY screen to set LOAD LOCK to OFF.
Track searching fails to halt
with Auto Cue function turned
ON.
•Track searching sometimes takes longer than
expected when the length of silent portions
between tracks is unusually long.
•If a search cannot be performed within 10
seconds, the track's start is set as the cue point.
•Hold the TIME/A.CUE button depressed for one
second or more to set t
he Auto Cue mode to
O
FF.
The jog dial performs a
different function from that
desired.
• The jog mode is incorrect. • Press the SCRATCH/JOG BREAK button to
select the desired function.
Back cueing fails to work when
the CUE button is pressed
during playback.
•No cueing point has been defined. • Specify the desired cueing point. (P. 36)
Unable to produce loop
playback by pressing the OUT/
ADJUST button.
•No cueing point (i.e., starting point) has been
defined.
•Specify the desired cueing point. (P. 36)
Auto cue and other setting are
not stored.
•The power was turned off right after a setting
was made.
• Wait 10 seconds before turn
ing off the power
after a cha
nge.
Can’t store cue/lop point data
for tracks on USB storage
device.
• Insufficient space on USB storage device. • Delete unnecessary files or other make
sufficient space on USB storage device.
Recorded USB storage device
cue and loop points aren’t
displayed.
•USB storage device was disconnected before
performing proper dismount procedure, or
power was turned off.
•Always perform proper dismount procedure
before di
sconnecti
ng USB storage device or
turning off power.
Playlist tracks appear grayed
out.
•The disc or USB storage device for the recorded
tracks is not loaded/connected.
•Load or connect the disc or USB storage device
for the recorded tracks.
•The recorded tracks have been deleted from the
USB storage device.
• The file names for the recorded tracks have been
changed, or the files moved.
• Once again record the changed file names or
changed locations in the playlist.
•USB storage device was disconnected before
performing proper dis
mount procedure, or
powe
r was turned off.
•Always perform proper dismount procedure
before disconnecting USB storage device or
turning off power.
Can’t record tracks located on
USB storage device on playlist.
• Insufficient space on USB storage device. • Delete unnecessary files or other make
sufficient space on USB storage device.
Keyboard input isn’t correct. • KEYBOARD LANGUAGE setting is incorrect. • Use UTILITY screen’s KEYBOARD LANGUAGE
setting to select the proper input language.
•You are using a keyboard for a langua
ge other
than the eleven support
ed by this unit.
• Use a keyboard for one of the supported
languages.
Character data for MP3, AAC
format tracks appears garbled.
• LANGUAGE setting is incorrect • Go to the UTILITY screen and set LANGUAGE to
the language of your choice.
•The track information for the music file created
in the DJ software is in a language not
supported by this unit.
•Input the file information in a language
supported by this unit. This unit is able to display
European languages, Russian, simplified
Chinese and Japanese.
•The track information for this unit is in a
language not supported by the DJ software.
•For informati
on on the languages supported b
y
your DJ software, check the instruction manual
for the software you are using.
Tracks contained in m3u files
won’t load.
• m3u file is not recorded correctly. • Confirm correct recording format for m3u file.
Description of problem Possible cause of problem Recommended action
MEP-7000_WY_EN.book 65 ページ ２００９年２月１２日 木曜日 午後８時２１分