Filter
Top Products
button or the [-] button to adjust the level value.
The LCD displays the current level value. The
default value is 92.
Chorus Type
A total of 8 different chorus types are available.
Use the dial,the [+] button or the [-] button to
select the chorus type. LCD takes turns to
display Chorus1/Chorus2/Chorus3/Chorus4/
Feedback/Flanger/Short delay/FB delay. The
default type is Chorus3.
Chorus Level
It ranges from 0 to 127. Use the dial, the
numeric keypad [0]-[9] button, the [+] button or
the [-] button to adjust the level value.
The LCD displays the current level value. The
default value is 0.
Harmony Type
You can add a variety of harmony notes to your
performance in the right-hand section.
A total of 8 different harmony types are
available. Use the dial, the [+] button or the [-]
button to select the harmony type. LCD takes
to turns display Duet/1+5/Country/Trio/Block/
4 Close1/4 Close2/4 Open. The default type is
Duet.
Utility
Press the [FUNCTION] button. Select "Utility"
menu. Press the [NEXT] button to select Tune
Value/Touch Type/Voice R1 Octave/Voice R2
Octave/Voice L Octave/Pitch Bend Range/Split
Point/Pedal Assign. Use the dial, the [+] button
or the [-] button to select the utility sub-menu.
Press the [NEXT] button to enter parameter
setting.
Tune Value
In the Tune Value setting, LCD displays the
current tune value. Use the dial, the [+] button
or the [-] button to adjust the tune value. This
function can apply to the right area of keyboard.
The parameter range -50 to 50.
Press the [+] button and the [-] button
simultaneously will set the tune value to the
default. The default value is 000.
Note:
When the tune value is +50, the note has
changed 100 cents.
When the tune value is 50, the note has
changed -100 cents.
Touch Type
In the touch type setting, use the dial, the [+]
button or the [-] button to select the touch type.
A total of 3 different touch types are available.
They are Soft/ Medium/Hard. The default type
is Medium.
VOICE R1 OCTAVE
In the voice R1 octave setting, LCD displays
the current octave value. Use the dial, the [+]
button or the [-] button to adjust the voice R1
octave value. This function can apply to the
right area of keyboard. The parameter range -1
to 1. The default value is 0.
Press the [+] button and the [-] button
simultaneously to set the octave value to the
default.It can function after pressing the [DUAL]
button and selecting VOICE R1.
VOICE R2 OCTAVE
In the voice R2 octave setting, LCD displays
the current octave value. Use the dial, the [+]
button or the [-] button to adjust the voice R2
octave value. This function can apply to the
right area of keyboard. The parameter range -1
to 1. The default value is 0.
Press the [+] button and the [-] button
simultaneously will set the octave value to the
default one. It can function after pressing the
[DUAL] button.