Filter
Top Products
the [BACK] button in edit mode.
It will quit the ABC mode automatically when
you enter the SYNTH status.
Parameters table for SYNTH as follow:
Parameter Name
Value
Range
Default
USER Voice
342-350
342
001
343
021
344
024
345
033
348
080
346
040
349
029
347
050
350
130
PCM Voice
001-328
Vibrate Rate
0 127
64
Vibrate Depth
0 127
64
Vibrate Delay 0 127 64
Env
elope.Attack
0 127
64
Envelope.Decay 0 127 64
Envelope.Release 0 127 64
Album
There are 100 album songs in all (see
"APPENDIX 6 album list" ). These parameters
can not be changed. They include VOICE R1/R2,
DSP, accompaniment type, OCTAVE,
HARMONY etc.
Press the [ALBUM] button. The ALBUM icon
on the LCD is illuminated. ABC mode is turned
on and placed in the SYNC START state. The
number and its name of the current song is
highlighted on the top line of lattice area. You
can select songs with the dial,[+],[-] & [0]-[9]
button. The song starts to play after playing the
keyboard in the LH chord area.
You can change the tempo while the album song
is playing. Press the [TEMPO+] and the [Tempo-]
button simultaneously to set the tempo to the
default of each album song.
To exit the album modes, press one of the
following buttons: [STYLE], [VOICE], [DUAL],
[LOWER VOICE], [SYNTH], [M1]~[M6],
[O.T.S.].
You can exit the ALBUM and enter the
RECORD mode by pressing the [RECORD]
button while ALBUM is not playing.
You can exit the ALBUM & enter the DEMO
mode by pressing the [DEMO] button.
But, it can not return to the STYLE status after
stopping to play the demo.
Record
There are 2 songs named User Song 1& User
Song 2 that can be recorded. Every song
includes 1 ACCOMP track & 4 MELODY tracks.
Recorded data can be stored while power is off.
Press the [RECORD] & the [PLAY] button at
the same time before turning on the power. All
the recorded data will be erased.
Note:
Record function does not function while it is in
user voice mode. The recordable voice range is
001 341.
PCM voice can be recorded..
You can not enter the RECORD function while
style & album is playing.
Reset the TUNE & TRANSPOSE parameters
while waiting for record.
Metronome can be used while recording or
playing the song.
Press the [DEMO] button during recording. It
will exit the RECORD and enter the DEMO
mode. The recorded data is not lost.