Filter
Top Products
root of SMC are displayed on the lattice area
with two lines. The current file is highlighted.
The main name of the file includes 8 characters,
the postfix name is REC. You can select songs
with dial or the [+] & the [-] button.
Press the [NEXT] button to affirm the desired
file. The menu of "Load Into Record 1" and
"Load Into Record 2" are displayed on the lattice
area with two lines. The current one is
highlighted. You can select them with dial or the
[+] & the [-] button.
Press the [NEXT] button. The data will be
loaded into the user song 1 or 2. "Operation
Completed" is displayed temporarily on the LCD
and it will exit SMC function and return to the
previous status. The relative user song and tracks
icon will be illuminated at the same time.
Save file
Press the [SAVE] button. The SMC icon is
lightened on LCD. Two file types that can be
saved are displayed on the lattice area with two
lines, the current type is highlighted. You can
select them with dial or the [+] & the [-] button.
Save Memory Data
Select the "menu Save Memory Data" and press
the [NEXT] button, "A_______.MEM" is
displayed on the lattice area .The letter A flashes
which indicates the input state (input method see
"3.file name input" below). Press the [NEXT]
button again to end the input.
The file includes 48 memories' data will be
saved to the root of the SMC. "Operation
Completed" is displayed temporarily on the LCD
and it will exit the SMC function and return to
the previous state.
Save Song File
Select the menu "Save Song " & press the
[NEXT] button. The menu of "Save Song 1 "
"Save Song 2 " are displayed in the lattice area
with two lines. You can select them with the dial
or the [+] & the [-] button. Then press the
[NEXT] button. "A_______.REC" is displayed
in the lattice area. The letter A flashes which
indicates the input state (input method see
"3.file name input " below). Press the [NEXT]
button again to end the input. The recording data
will be saved in the root of the SMC. "Operation
Completed" is displayed temporarily on the LCD
and it will exit the SMC function and return to
the previous state.
File name Input
File name includes 1-8 characters to be input
with the keyboard .
[SHIFT]: 26 letters will be displayed with
capital letters by pressing the
keyboard in the letter area directly.
To display small letters, press the
[SHIFT] button hold on.
[DELETE]: when the flashing cursor is at the
last character (the eighth bit),
press it to erase the current
character. Otherwise, it will erase
the left character.
[BACK ]: move the current cursor to the left.
[NEXT]: move the current cursor to the right.
In file name input state, "A_______.MEM" or
"A_______.REC" is displayed on the lattice area
and the letter A flashes.
If there's nothing input, letter A will be saved as
the file name by pressing the [NEXT] button. If
you input the first character with keyboard, it
will be displayed on LCD. The cursor moves to
the right & flashes, which indicates the input
state to be continued. When the last character &
cursor are displayed and flashed, the file name is
over 8 bits character.
You can edit the characters input with the
[SHIFT],[DELETE], [BACK ],[NEXT] button
when inputting the character .