Filter
Top Products
Freeze
When the FREEZE function is engaged,
selecting a different memory setup will not
change any of the accompaniment and Voice L
parameters (all other parameters will changes as
programmed). This allows you to use the auto
accompaniment and select different memory
setups without suddenly disturbing the flow of
the accompaniment.
Press the [FREEZE] button. The [FREEZE]
LED lights. Press the [FREEZE] button
again to exit from the FREEZE mode. The
[FREEZE] LED turns off.
In the FREEZE setting, press one of the [1] -[6]
memory buttons. In this situation, only the
voice parameter settings memorized to each
button number are recalled.
Note:
Please refer to the MEMORY function to see the
detail accompaniment data.
One touch setting
One touch setting is a powerful and convenient
function that lets you instantly reconfigure
virtually all auto accompaniment related panel
settings with the touch of a single button.
In this function, it can load 4 types of parameters
(M1~M4) which are suitable for the current
style.
Press the [O.T.S] button to enter this mode and
the O.T.S icon on the LCD appears. Press the
[M1]-[M4] button, it will load four types of
parameters which are related to the style. M1
and M2 store the parameters for the normal style,
while M3 and M4 store the parameters for the
variation style. A.B.C mode is set to on
automatically while the O.T.S is on.
When the style is playing, press the [O.T.S]
button to turn on the O.T.S. It will automatically
insert "FILL A'' or " FILL B" according to the
memory number.
Press the [O.T.S] button again to exit O.T.S
mode.
The parameters stored in the O.T.S includes
VOICE R1, VOICE R2, VOICE LOWER, their
OCTAVE and VOLUME and CHORUS
TYPE/LEVEL, REVERB TYPE/LEVEL value.
Note:
Pressing the [O.T.S] button will not insert the
"Fill in" when the user song is being recorded.
Pedal
Various functions can be assigned to the
footswitch connected to the SUSTAIN jack.
The polarity of the footswitch can also be
selected.
Foot switch
Press the [FUNCTION] button to enter the
"UTILITY " menu. Press the [NEXT] button to
select the pedal assign menu. Press the [NEXT]
button. LCD displays the " sustain pedal " .Use
the dial, the [+] button or the [-] button to select
the Soft Pedal, Start/Stop Pedal, Tempo/Tap
Pedal, Memory Select Pedal.