Filter
Top Products
25Troubleshooting
Troubleshootin
g
If your keyboard is not performing as it should, these suggestions might help. If you
still cannot solve the problem, take the keyboard to your local RadioShack store for
assistance.
Trouble Possible Cause Remedy
No sound, even if keys
are pressed.
The keyboard has turned
off automatically.
Set
POWER/MODE
to
OFF
then
ON
again.
Volume is turned down. Repeatedly press
MAIN VOL-
UME
▲
to increase the volume.
Headphones are con-
nected.
Disconnect headphones.
Power supply problem. Check the power supply.
Are battery symbols
(+/–) facing correctly?
Are the batteries fresh?
Is the AC or DC adapter con-
nected properly?
You are pressing too few
accompaniment keys
while
POWER/MODE
is
set to
FINGERED
.
Set
POWER/MODE
to
NOR-
MAL
or
CONCERT CHORD
.
Press 3 or 4 keys to form a
chord while
POWER/MODE
is
set to
FINGERED
.
No sound when con-
nected to an external
amplifier.
Volume
is turned down. Repeatedly press
MAIN VOL-
UME
▲
to increase the volume.
Defective connection cord. Replace the connection cord.
The key or tuning does
not match when playing
along with another MIDI
instrument.
The tuning or transpose
parameter is set to a value
other than
0
or
00
.
Set the
tuning or transpose to
0
or
00
.
No sound when receiving
and playing MIDI data.
MIDI cables are not con-
nected properly.
Check the connection.
Bass notes in General
MIDI data are sent out
one octave lower.
Tone map parameter is set
to
N
.
Set the tone map parameter to
G
(see “Changing MIDI Set-
tings” on Page 23).