Roland A-500PRO Electronic Keyboard User Manual


 
39
Using A-PRO Editor
Free Message
Assign a MIDI message.
You can enter up to twenty-four bytes. You may assign more than one MIDI message if
desired.
fig.editor-freemsg.eps
Specify the following parameters.
Tempo
Assign tempo control for transmitting MIDI CLOCK messages.
fig.editor-tempo.eps
There are no parameters to specify.
* This will not function if assigned to a button.
Item Content
Message entry field
You can enter a MIDI message of up to twenty-four bytes. Enter each
byte as a hexadecimal value separated by a single-byte space.
The following limitations apply to the input.
* You can’t use a checksum.
* You can’t use a special character as the first byte.
You can also enter variable data using the special characters de-
scribed in “Table 1: Special characters used in the message entry
field” (p. 38). If you use the special character “DT,” use the Data Type
field to specify the type of data.
Data Type
If you’ve used the special character “DT” in the message entry field,
use this to specify the type of data to be inserted at that location. For
the types of data that can be specified, refer to “Table 2: Types of
data you can specify in the Data Type field” (p. 38).
Min Value Lower limit of the data value
Max Value Upper limit of the data value
A-300_500_800C_e.book 39 ページ 2010年2月22日 月曜日 午後9時13分