Filter
Top Products
9
Português Italiano DeutschNederlands Español Français
English
FOOT SW
By connecting a foot switch (BOSS FS-5U or FS-6; sold separately),
you’ll be able to use your foot to switch between channels, turn
EFX, Reverb, and Delay on/o , and control the Looper function. The
connection diagram at left is a connection example that shows how
to use a momentary-type foot switch (FS-5U, FS-6). For details on
connections and settings when using a latch-type foot switch (BOSS
FS-5L; sold separately), refer to”Using a Latch-type Foot Switch” (p. 10).
1. TIP: DELAY/REC/PLAY/DUB
RING: TAP/STOP
Switch Description
TIP
If the [DELAY/LOOPER] knob is in the DELAY area, the Delay will
be switched on/o .
If the knob is in the LOOPER area, the foot switch will have the
same function as the panel’s [REC/PLAY/DUB] switch.
RING
The foot switch will have the same function as the [TAP/STOP]
switch.
* You must use a momentary-type foot switch with the RING (TAP/
STOP) of this jack. It will not work correctly with a latch-type foot
switch (p. 10).
2. TIP: EFX
RING: REVERB
Switch Description
TIP
The foot switch will turn on/o the e ect selected by the [EFX]
knob.
RING
The foot switch will turn on/o the reverb set by the [REVERB]
knob.
3. TIP: CH SELECT
RING: SOLO
Switch Description
TIP
The foot switch will switch between the JC CLEAN channel and
the LEAD channel.
RING The foot switch will turn SOLO on/o .
4. [FOOT SW TYPE] Switch (CUBE-80XL only)
This selects the type of foot switch that is connected.
When shipped from the factory, the CUBE-40XL’s FOOT SW TYPE is set
to the momentary type. For details on how to change this setting, refer
to”Using a Latch-type Foot Switch” (p. 10).
* The CUBE’s FOOT SW (foot switch) jacks are
TRS type jacks, and support plugs of the type
shown in the illustration. Use TRS cables to
connect your foot switch.
EXT SPEAKER (CUBE-80XL only)
5. EXT SPEAKER Jack
This is for connecting an external speaker.
When an external speaker is connected, sound is played both from the
external speaker and from the unit’s built-in speaker.
* When connecting to an external speaker, make sure the speaker
conforms to the following speci cations.
Impedance: 8 ohms or less
Allowable power input: 80 watts or greater
* Only use speaker cable to connect the speaker. Do not use any
shielded cable designed for use with guitars.
RECORDING OUT/PHONES
6. RECORDING OUT/PHONES Jack
This functions either as an output jack for recording or as aphones
jack.
This features COSM speaker modeling, enabling production of
impressive guitar sound.
Adjust the volume using the [VOLUME] knobs for the JC CLEAN and
LEAD channels and the SOLO function.
* When a plug is connected to this jack, no sound is played from
either the unit or any connected external speaker. This is handy at
night or in other situations when you want to avoid high-volume
sound from the speakers.
When using as an output jack for recording
Use a monaural 1/4” phone plug to connect a recorder or other
recording device.
When using as a headphones jack
Connect headphones.
LINE OUT (CUBE-80XL only)
7. LINE OUT Jack
This is for connecting a PA system, recorder, or other external
equipment.
This features COSM speaker modeling, enabling production of
impressive guitar-amp sound.
You can use this in conjunction with an external PA system, or to
record your performance via direct line while monitoring the sound
from the CUBE’s speaker.
Adjust the output level using the [VOLUME] knobs for the JC CLEAN
and LEAD channels and the SOLO function.
* The sound from AUX IN is not output from LINE OUT.
AUX IN
8. AUX IN Jack
This lets you connect a CD player, digital audio player, electronic
instrument, or other such device and play it at the same time as the
guitar.
This accepts a stereo miniature phone plug. However, the speaker
and RECORDING OUT/PHONES output is monaural. Use a cable (sold
separately) that’s appropriate for the device you’re connecting.
* Determine the volume level by adjusting the volume control of the
connected device.
* When connection cables with resistors are used, the volume level
of equipment connected to the AUX IN jack may be low. If this
happens, use connection cables that do not contain resistors.
TIP
RING