Filter
Top Products
31
Performing
You can apply a reverb effect to the notes you play on the keyboard. With the reverb
effect, you obtain a pleasant reverberation, making it sound as if you were performing
in a concert hall or similar space.
fig.Panel-Reverb-e.eps
1.
Press the [Reverb] button so it’s lit.
Try fingering the keyboard.
The reverb effect is applied to the entire tone.
Turning Off the Reverb Effect
1.
Press the [Reverb] button so its light is turned off.
Reverb will not be applied if Twin Piano is turned on with Twin Piano Mode “2”
selected.
You can select from ten levels of depth for the reverb effect.
1.
Hold down the [Reverb] button and press the [-] or [+] button.
The depth for the reverb effect appears in the display.
fig.d-4.eps
You can use the Memory Backup function to store this setting in internal memory (p.
80).
You cannot make separate reverb effect depth settings for each individual tone.
The effect will be applied with the same depth to all tones.
This will not change the reverb depth for the song that is playing back.
Adding Reverberation to Sounds (Reverb Effect)
Changing the Depth of Reverb Effect
NOTE
NOTE
NOTE
DP-990_e.book 31 ページ ２００７年８月２２日 水曜日 午後４時３５分