Filter
Top Products
80
Various Settings
Normally, the settings of the various variations will revert to
their default values when the power is turned off. However,
you can specify that the various settings will be remembered
even when the power is turned off.
This function is called “Memory Backup.”
1.
Hold down the [Brilliance] button and press
the [3D] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
fig.d-Fnc.eps
2.
Press the [Left] button.
The display will indicate “buP” and the [ ] button
will blink.
3.
Press the [ ] button.
The display will indicate “Sur,” and the [ ] button
and [ ] button will blink.
If you decide not to save the settings, press the
[ ] button.
4.
To save the settings, press the [ ] button.
Never turn off the power while “buP” is blinking in
the display.
When the memory backup has been completed, the
display will indicate “Fnc.”
fig.d-Fnc.eps
For details on the settings stored by the Memory
Backup operation, refer to p. 98.
The settings you’ve changed in Function mode can be restored
to their factory-set condition. This operation is called “Factory
Reset.”
Execute this operation if you want the settings you’ve stored
using Memory Backup to be returned to their original state.
When you execute “Factory Reset,” all settings
you’ve stored up to that point will be cleared, and
reset to their factory-set condition.
Executing this operation will not erase the songs
from internal memory or USB memory.
If you want to erase all songs from the DP-990‘s
internal memory and all songs from USB memory,
refer to “Initializing the Memory” (p. 60).
1.
Hold down the [Brilliance] button and press
the [3D] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
fig.d-Fnc.eps
2.
Press the [Right] button.
The display will indicate “Fct” and the [ ] button
will blink.
3.
Press the [ ] button.
The display will indicate “Sur,” and the [ ] button
and [ ] button will blink.
If you decide not to execute the Factory Reset, press the
[ ] button.
4.
To execute the Factory Reset, press the [ ]
button.
Never turn off the power while “Fct” is blinking in
the display.
Remembering the Settings
(Memory Backup)
NOTE
Restoring the Settings to the
Factory Condition (Factory
Reset)
NOTE
NOTE
DP-990_e.book 80 ページ ２００７年８月２２日 水曜日 午後４時３５分