Filter
Top Products
44
Chapter 4 Other Functions
■
Works of the Soft Pedal(FC2)
When the instrument is turned on, this is set to function as a
soft pedal.
1.
Switch to Function mode, and press the
[Strings/Pad] button.
fig.04-02
2.
Press the [-] or [+] button to select the pedal
function.
■
Works of the Sostenuto
Pedal(FC1)
When the instrument is turned on, this is set to function as a
sostenuto pedal.
1.
Switch to Function mode, and press the
[Voice/GM2] button.
2.
Press the [-] or [+] button to select the pedal
function.
Changing the Work of the
Pedal Control
Connecting the included pedal to the Damper jack allows
you to use pedal to alter the sounds’ pitches, when you press
the [Pedal Control] button to light up.
It can also be set to function as an another works.
1.
Switch to Function mode, and press the
[Pedal Control] button.
fig.04-04
2.
Press the [-] or [+] button to select the pedal
function.
* The function may not work properly if a pedal other than the
supplied pedal or expression pedal is used.
* Be sure to switch off the power to the unit before attempting to
disconnect or connect a pedal cord.
Setting the Part to Which
Effects Are Added
This specifies which part is to have priority when the effects
assigned to the Upper Tone and Lower Tone differ in Dual
Play or Split Play.
1.
Switch to Function mode, and press the [Effects]
button.
fig.04-04
2.
Press the [-] or [+] button to select Upper or
Lower.
→
If same effects are assigned to the Upper Tone and Lower Tone,
the same effects are added to both of Tones.
Changing the Pitch of the
Lower Tone in Octave Steps
(Octave Shift)
You can change the pitch of the Lower Tone in Dual Play
(p. 18) and Split Play (p. 19) an octave at a time.
Altering the pitch in one-octave units in this way is called
“Octave Shift.”
For example, you can raise the pitch of the Lower Tone to the
same pitch of the Upper Tone in Split Play.
1.
Switch to Function mode, and press the [Split]
button.
indication function description
b.uP
Bend Up Pitch rises by pressing the pedal
b.dn
Bend Down Pitch lowers by pressing the
pedal
Mod
Modulation Vivrato is added by pressing the
pedal
flashes in red
flashes in red
indication description
-U-
(Upper)
Effects are added to the Upper Tone.
-L-
(Lower)
Effects are added to the Lower Tone.
flashes in red
FP-5_e.book 44 ページ ２００５年１月２６日 水曜日 午前１０時２２分