14
Before You Start Playing
Turning the Power On and Off
NOTE
Once the connections have been completed, turn on
power to your various devices in the order specified.
By turning on devices in the wrong order, you risk causing
malfunction and/or damage to speakers and other
devices.
1.
To turn the power on, turn the [VOLUME] knob all
the way down, and then press the [POWER] switch.
The power will turn on, and the indicator of the [TONE]
button will light.
After a few seconds, you will be able to play the
keyboard to produce sound.
Use the [VOLUME] knob to adjust the volume.
NOTE
This unit is equipped with a protection circuit. A brief
interval (a few seconds) after power up is required before
the unit will operate normally.
fig.00-06.e
Turning the Power Off
1.
To turn the power off, turn the [VOLUME] knob all
the way to the left, and press the [POWER] switch.
The indicators for all buttons will go out, and the power
will turn off.
NOTE
If you need to turn off the power completely, first turn off
the [POWER] switch, then unplug the power cord from the
power outlet. Refer to “Power Supply” (p. 7).
Adjusting the Sound’s Volume
1.
Turn the [VOLUME] knob to adjust the overall
volume.
fig.00-07.e
About the Pedals
The pedals perform the following operations. You’ll use them
mainly when playing piano.
Damper Pedal (right pedal)
While this pedal is held down, notes will be sustained for an
extended time even if you release your fingers from the
keyboard.
On an acoustic piano, holding down the damper pedal will
cause the strings for notes other than the ones you actually
play to vibrate in sympathy with what you’ve played,
producing a rich resonance. The RP101 simulates this
sympathetic vibration (damper resonance).
NOTE
You can change the amount of resonance applied with
the damper pedal. Refer to “Changing the Damper
Pedal’s Resonance (Damper Resonance)” (p. 34).
Sostenuto Pedal (center pedal)
This pedal sustains only the sounds of the keys that were
already played when you pressed the pedal.
Soft Pedal (left pedal)
This pedal is used to make the sound softer.
The volume
decreases
The volume
increases
Soft Pedal
Sostenuto Pedal
Damper Pedal
RP101_e.book 14ページ 2007年4月4日 水曜日 午前11時50分