Filter
Top Products
5
Getting Started
Check the Contents of the
Box
❑ TD-8 (Percussion Sound Module) x 1
❑ KD-80 (V-Kick Trigger) x 1
❑ FD-6 (Hi-Hat Control Pedal) x 1
❑ PD-80R (V-Pad) x 1
❑ PD-80 (V-Pad) x 3
❑ CY-12R/C (V-Cymbal) X 2
❑ PD-7 (Pad) x 1
❑ Accessory Set x 1
❑ Connection Cable Set x 1
❑ Connection Cable (1 meter) x 2
(for Hi-Hat: PD-7/Snare: PD-80R)
❑ Connection Cable (2 meters) x 5
(for Kick: KD-80/Tom1, 2: PD-80 x 2/
Hi-Hat Control Pedal: FD-6
/Crash: CY-12R/C
)
❑ Connection Cable (3.5 meters) x 2
(for Tom3: PD-80/Ride: CY-12R/C)
■ TD-8KV Owner’s Manual (this manual) x 1
• This package does not include a drum stand. Please use
the separately available drum stand (MDS series).
• This package does not include a kick pedal. Use with a
commercially available kick pedal.
• The TD-8 Owner’s Manual is included in the TD-8
package.
962a
In the interest of product improvement, the specifications
and/or appearance of this unit are subject to change without
prior notice.
Setup Procedure
1. Assemble the drum stand.
For more information on assembling the stand, refer to
the owner's manual for the stand.
2. Adjust the head tension of the KD-80, PD-80R, and
PD-80 (p. 6).
3. Set up the pads, cymbals and pedals.
• KD-80 (Kick) → p. 8
• PD-80R (Snare)/PD-80 (Tom-Tom) → p. 10
• CY-12R/C (Ride, Crash) → p. 10
• PD-7 (Hi-Hat) → p. 12
• FD-6 (Hi-Hat Control Pedal) → p. 13
• TD-8 (Percussion Sound Module) → p. 13
4. Connect all pads and the like to the TD-8 (p. 14).
❏ Tuning Key
(for KD-80, PD-80R,
PD-80, CY-12R/C, and FD-6) x 1
❏ Beater (for KD-80) x 1
❏ Anchor Bolt (for FD-6) x 2
❏ Spring for Anchor Bolt (for FD-6) x 2
❏ Wing Nut (for CY-12R/C) x 2
❏ Felt Washer (for CY-12R/C) x 2
❏ Stopper (for CY-12R/C) x 2
❏ Cable Tie (fir CY-12R/C) x 2