Filter
Top Products
25
Performing
You can add a pleasant reverberation to the sounds you play from the keyboard, producing the impression that you are performing
in a concert hall. This effect is called “Reverb.”
fig.Panel
1.
Press the [Reverb] button.
The [Reverb] button will light.
If you press the [Reverb] button once again, the button will go out and the reverb effect will be
eliminated.
Adjusting the Depth of the Reverb Effect
fig.Panel
1.
While holding down the [Reverb] button, press the [-] or [+] button.
The display will indicate the depth of the reverb effect values.
Higher values apply deeper reverb.
The adjusted setting will return to its original values when you turn off the power. If you wish, you
can have this setting be retained even while the power is turned off (p. 59).
* You can’t specify the depth of the reverb effect independently for each sound. Reverb is applied at the same depth for each
sound.
* The depth of the reverb effect for the song that’s playing will not change.
* The reverb effect is not applied if Twin Piano mode (p. 28) is set to “individual.”
Adding Reverberation to the Sound (Reverb)
Reverb depth range
1–10
What are Effects?
In addition to reverb, the HP307 provides a wide variety of other “effects” that can modify the sound in various ways.
An appropriate effect is selected for each different tone.
* Some tones do not have an effect.
HP307_e1.book 25 ページ ２０１０年１月４日 月曜日 午後５時３９分