Filter
Top Products
Various Settings (Function Mode)
Indication Value Explanation
CPdl Fnc
Changing How the Pedals Work (Center Pedal)
When you turn on the power, the center pedal functions as the sostenuto pedal (p. 10).
You can change the function of the pedal to a variety of other operations.
SOST Sets function to sostenuto pedal.
PLAY
The pedal will have the same function as the [
] (Play/Stop) button.
LAYR
Pressing the pedal will layer on Tone 2, used for Dual play.
* The Layer function can be applied only when using Dual play.
OCT
Pressing the pedal will layer on a sound one octave higher.
* The Octave function cannot be applied while using Twin Piano, Dual play, or Split play.
LocalCtl
Preventing Doubled Notes When Connected to a Sequencer
(Local Control)
When you have a MIDI sequencer connected, set this parameter to Local O.
Since most sequencers have their Thru function turned on, notes you play on the
keyboard may be sounded in duplicate, or get dropped. To prevent this, you can
enable the “Local O” setting so that the keyboard and internal sound generator will be
disconnected.
OFF
Local Control is o.
The keyboard and composer are disconnected from the internal sound generator. Playing the keyboard will not produce sound.
ON
Local Control is on.
The keyboard and composer are connected to the internal sound generator.
MIDI Ch
MIDI Transmit Channel Settings (MIDI Transmit Channel)
This setting species the MIDI channel on which the unit will transmit.
MIDI uses sixteen “MIDI channels,” which are numbered 1 through 16. By connecting MIDI
devices and specifying the appropriate MIDI channel for each device, you can play or select
sounds on those devices.
The unit will receive all sixteen channels (1–16).
OFF, 1–16
CD/A Typ
Setting the Type of CD To be Played Back (CD/Audio Type)
The unit may be unable to correctly recognize the type of CD being used. In such instances, you can specify the type of CD manually.
When the unit left the factory, this was set to “STRO” (Stereo). Normally, there is no need to make this setting.
MEMO
This setting is automatically saved in the unit.
AUTO, A, B, STRO
MIDI
Sequencer
Local Control
Sound Generator
MIDI
In
MIDI
Out
How to save your settings?
Save your settings as described in “Memory
Backup” (p. 41).
48