Filter
Top Products
Setting up the PC-300
The PC-300 is a MIDI controller. It contains no sound-generating circuitry of its own, but
it can effectively control external units (sound module, computer, etc.) by transmitting a
wide variety of MIDI messages.
To ensure maximum benefit from your system, be sure to read this manual and the manu-
als for the external equipment you are using.
Controlling other MIDI devices
1.
Connect the PC-300’s MIDI OUT port to the MIDI IN connector on the sound module
you wish to control.
2.
Set the PC-300’s KEYBOARD/PC switch to “KEYBOARD”.
Desk Top Music setup
When connecting your computer with a sound module via a serial connection, use only a
serial cable which is designed for the model of computer you are using and its particular
kind of connector.
If the sound module has a COMPUTER/TO HOST switch, be sure to set it to the appropri-
ate position. This will vary depending on the type of computer, the way you are connecting
it, and the requirements of the software you are using.
Select "KEYBOARD"
To MIDI IN of the
sound module
MIDI OUT
connector
MIDI IN
connector
PC-300
Sound module
Stereo set, etc.
OUTPUT jacks
Monitor speakers
(powered)
INPUT jacks
LINE IN,
AUX, or TAPE IN
8
PC-300