Filter
Top Products
9. Controlling a sound module with the DATA
ENTRY slider
The following functions can be assigned to the DATA ENTRY slider:
15
Owner’s Manual
Note: In some cases, moving the slider only
slightly may not produce any noticeable
change. If this happens, move the slider up
and down once, then set the value.
Altering the timbre (Channel
Aftertouch)
The PC-300’s keyboard does not transmit
Channel Aftertouch messages. You can,
however, achieve a similar result by assign-
ing Channel Aftertouch to the DATA
ENTRY slider and moving it up and down
to obtain the desired effect.
Channel Aftertouch is a function that lets
you alter notes (that have already been
played) by applying additional pressure on
the keys.
1.
Set the MIDI transmit channel to
match that of the Part or module you
wish to control.
See “Setting the MIDI transmit channel”
on page 11.
2.
Press MIDI/SELECT [3] (the LED will
light).
Function name Description
Channel Aftertouch Alters the notes currently being played (volume, pitch, filter)
Velocity Changes the dynamics (timbre, volume)
Reverb Level (CC 91) Sets the depth of the Reverb effect
Chorus Level (CC 93) Sets the depth of the Chorus effect
Panpot (CC 10) Sets the sound position (localization in the stereo sound field)
Volume (CC 07) Sets the volume level of the Part
CC Select Depends on the selected controller number
ENGLISH