Filter
Top Products
10
Power
How to Connect the AC Adaptor
The PC-70 can be powered by an AC adaptor.
Be sure to use only the attached AC adaptor. Using any other adaptor may cause
malfunction or electric shock.
1.
Check that the unit is OFF.
2.
Connect the AC adaptor to the AC Adaptor jack, then connect the plug to a power
outlet.
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume,
and turn off the power on all devices before making any connections.
* If the unit is to remain unused for an extended period of time, unplug the AC adaptor.
Setting Up the PC-70
The PC-70 is a MIDI controller. Although it contains no sound-generating circuitry of its
own, it can effectively control external units (sound module, computer, etc.) by transmitting
a wide variety of MIDI messages.
To ensure maximum benefit from your system, be sure to read this manual and the manuals
for all external equipment.
■
Sound Module Setup
Connect between the MIDI OUT connector on the PC-70 and the MIDI IN connector on the
sound module.
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume,
and turn off the power on all devices before making any connections.
fig.PC70-SC.e
MIDI OUT
MIDI IN
PC-70
Sound Module
Stereo set, etc.
OUTPUT
jacks
Monitor speakers
(self-powered)
INPUT jacks
LINE IN jacks,
AUX jacks,
or TAPE IN jacks