Filter
Top Products
22
Controllers 96 and above (NRPN/RPN, Channel Mode Messages)
Controller No. Control Function
96. Data Increment
97. Data Decrement
98. Non-Registered Parameter Number LSB
99. Non-Registered Parameter Number MSB
100. Registered Parameter Number LSB
101. Registered Parameter Number MSB
102–120 Undefined
121–127 Reserved for Channel Mode Messages
fig.controller.e
[Procedure]
1. Set the MIDI transmit channel to match that of the desired Part.
2. Press MIDI/SELECT [3] (LED will show “SEL”).
3. Press the F4 white key (CC SELECT) [13].
4. Select the Controller Number by pressing keys in the NUMERIC ENTRY section [17].
5. Press ENTER [19].
6. Press MIDI/SELECT [3] again to confirm your selection. Now you can use the DATA
ENTRY slider to transmit the value of the specified Controller Number.
Select CC Numeric Key Pad Enter