Roland TD-20K Musical Instrument User Manual


 
17
Playing Methods
fig.30
Bow Shot
This is the most common playing method, playing the middle area of the
cymbal.
fig.31.e
Edge Shot
This playing method involves striking the edge with the shoulder of the
stick.
The sound is played when the edge sensor area is struck, as shown in the
figure.
fig.32
Bell Shot (CY-15R Only)
This playing method involves striking the bell.
With the CY-15R, a sound is played when the bell portion is struck, as
shown in the figure.
* Strike the bell somewhat strongly with the shoulder of the stick.
* On the CY-14C, bell shots are not supported.
fig.33.e
Choke Play
Choking (pinching) the cymbal’s edge with the hand immediately after
hitting the cymbal makes the sound stop. Choke the location of the edge
sensor shown in the figure. If you choke an area where there is no sensor,
the sound does not stop.
fig.34
The CY-15R is capable of sensing the point on the bow that is struck.
You need to choose a cymbal tone that is compatible with positional
sensing.
The CY-15R’s sound changes when the cymbal is struck at different
points only when the cymbal is connected to the RIDE trigger input.
CY-15R/CY-14C
Positional Sensing
Edge sensor
Roland logo
Edge sensor
TD-20K_e.book 17 ページ 2006年12月7日 木曜日 午前9時24分