Samson XML410 Music Mixer User Manual


 
XML POWERED MIXERS
24
CD/TAPE IN • REC OUT
Playing Back a CD
The XML mixers have a dedicated input for playing back a CD,
Tape or MP3 player. To use the CD/TAPE INPUT, follow the steps
below.
1. Turn the TAPE IN VOLUME control and the MASTER level con-
trol all the way down.
2. Follow the “LAST ON, FIRST OFF” rule by turning on your
peripheral devices and then turning on the power on the XML
mixer.
3. Adjust the MASTER control of the MAIN section to the “5” posi-
tion.
4. Start playback on the CD, Tape or MP3 player. Use the TAPE IN
VOLUME control to adjust the level so that the zero LED of the
MAIN section peak level meter lights only occasionally. Adjust
the master volume control to raise the level, if necessary.
Recording From the XML Mixer
You can record the audio from the XML’s mixer section including
the MIC, LINE, TAPE IN and AUX inputs to a digital recorder, DAW,
DAT or any other type of recorder using the RECORD outputs.
Simply connect the mixer’s REC OUT to the input jacks of the
recorder, as shown in the diagram above.
Digital Recorder