Samson XML410 Music Mixer User Manual


 
Owner's Manual
9
XML POWERED MIXERS
Controls and Functions
12
13
14
15
16
17
18
12
13
14
15
16
17
18
24-Bit Digital Effects Section
The XML mixers feature built-in, 24-bit digital eects processors with 100 high-quality, studio grade eects like Delay,
Chorus and Reverb. The following section describes the features of the powerful on-board digital eects section.
12. Eects Program Display - The XML mixers’ digital-eects processors feature
dual-digit, seven-segment numerical display for showing the eects PRO-
GRAM number from 00 - 99. You will see the PROGRAM numbers change as
you scroll through the eects preset using the DSP SELECT control. When the
Eects Display shows two straight lines through the center of each segment,
the eects are turned o and the EFX ON switch is in the out position.
13. Eects SELECT - The SELECT control knob is a continuously variable encoder,
that allows you to call up one of the 100 built-in digital eects presets. Rotate
the SELECT knob to scroll through the preset programs using the Eects Pro-
gram Display to choose the number of the eect you want.
14. Eects ON Switch - The Eects ON switch is used to turn the internal digital
eects on and o. The eects are bypassed when the switch is in the out posi-
tion and the Eects Display shows two dashes.
15. Eects PROGRAM List - This section identies the ten banks of built-in DSP
eects presets. The rst bank of ten presets is designed for live performance,
and the subsequent banks are arranged in groups by the type of eect.
16. Eects LEVEL Control - The Aux 2/EFX signals from input channels are mixed
together and sent to the internal DSP and EFX 2 Output. The Eects LEVEL
control is used to adjust the amount of signal send to the DSP and EFX 2
Output.
17. EFX 2 Send Jack - The unbalanced 1/4” EFX 2 Send is used to route a signal
to an external signal processor such as a delay or reverb. The signal present at
the EFX 2 Send is routed from the EFX bus, which is fed from the input chan-
nel’s Aux 2/EFX control knob.
18. EFX FOOTSWITCH Jack - Connect a footswitch to the EFX FOOTSWITCH
phone input jack to toggle the internal digital eects On and O.