Seagate ST118202LW/LC DJ Equipment User Manual


 
Cheetah 18 Installation Guide, Rev. A 39
LW drives
LW drives sectionSetting the SCSI ID jumpers
Use the J6 connector to set the SCSI ID (see Figure 11). To
change the SCSI ID, install jumpers as shown in the illustration.
Figure 11. Setting the SCSI ID on ST118202LW drives
SCSI ID = 0
Jumper Plug
(enlarged to
show detail)
J6
Drive
Front
Pin 1
SCSI ID = 1
SCSI ID = 2
SCSI ID = 3
SCSI ID = 4
SCSI ID = 5
SCSI ID = 6
SCSI ID = 7
SCSI ID = 8
SCSI ID = 9
SCSI ID = 10
SCSI ID = 11
SCSI ID = 12
SCSI ID = 13
SCSI ID = 14
SCSI ID = 15