Filter
Top Products
Putting the receiver into operation
10 |
Tourguide 1039
Putting the receiver into operation
Inserting the batteries or the accupack
For powering the diversity receiver, you can either use two 1.5 V AA size batteries
or the rechargeable Sennheiser BA 2015 accupack.
For daily use, we recommend using the supplied BA 2015 accupack. The accupack
can be charged in the L 2015 charger without having to be removed from the
device.
̈ Open the battery compartment by pushing the two catches
A in the direction
of the arrows and open the cover 0.
̈ Insert the BA 2015 accupack or the two batteries as shown above. Please
observe correct polarity when inserting the accupack/batteries.
̈ Close the battery compartment by pressing on the center of the cover
0. The
battery compartment cover 0 locks into place with an audible click.
Charging the accupack
To charge the BA 2015 accupack installed in the receiver:
̈ Insert the diversity receiver into the L 2015 charger.
The receiver switches off and the accupack is being charged.
For more information on charging the BA 2015 accupack, refer to the instruction
manual for the L 2015 charger.
Connecting headphones
̈ Connect headphones with an impedance of at least 8 Ω to the 3.5 mm jack
socket
2.
ቫ
ቫ
ቭ
ቧ
Never switch on the receiver during charging because otherwise the accu-
pack will not be charged correctly.
The L 2015 charger can only charge the BA 2015 accupack. Standard bat-
teries (primary cells) installed in the receiver or individual rechargeable
battery cells cannot be charged.
Ch 4
English
ባ