Filter
Top Products
Configuring the receiver
18 |
Tourguide 1039
Activating the limiter of the headphone output – “Limiter”
Possible settings: “On”, “Off”
The limiter reduces the maximum volume at the headphone output by –12 dB.
Adjusting the contrast of the display panel – “LCD Contrast”
You can adjust the contrast of the display panel in 16 steps.
Displaying the software version – “Software Revision”
You can display the current software version of the receiver.
̈ For information on software updates, visit the EK 1039 product page at
www.sennheiser.com.
Copying the receiver settings to additional receivers – “Copy”
Via the “Copy” menu item, you can copy all settings of one receiver (A) to an arbi-
trary number of other EK 1039 receivers (B). This allows you to quickly and easily
transfer e.g. a new receiving channel to all other receivers in the system.
To prepare the receiver (A) to transfer the settings:
̈ Select a receiver.
̈ Set the desired receiving channel, the name, the squelch threshold, etc.
̈ Change to the “Copy” menu item.
All settings of this receiver (A) will be transferred to the other receivers (B).
To prepare the receivers (B) to receive the settings:
̈ Open the battery compartment cover of all receivers (B) to which you want to
transfer the settings.
̈ Switch on all receivers.
Upon delivery, the “Limiter” function is switched on. We recommend to
keep this function switched on at all times.
Setup
Off
Limiter
Limiter
Limiter
Call up “Limiter”
Select the desired
setting
Store the setting
“Stored”
SET
SET
Off On
Call up
“LCD Contrast”
Select the desired
setting
Store the setting
Name
Setup
LCD Contrast
7
7
LCD Contrast
“Stored”
LCD Contrast
10
Call up “Copy”
Deactivates the function
Data transfer function
“Copy” is active
Copy
Setup
SET
SET
Copy