Filter
Top Products
13
Using the radio microphone
To activate the RF signal:
To switch the radio microphone off:
̈ If necessary, deactivate the lock mode (see page 14).
̈ Press the multi-function switch.
The transmission frequency is displayed but the radio
microphone does not transmit an RF signal. The transmission
icon ብ is not displayed.
When the pilot tone function is
activated on both radio microphone and receiver, “RF Mute”
appears on the receiver’s display panel.
Use this function to save battery power or to prepare a radio
microphone for use during live operation without causing
interference to existing transmission links.
̈ Briefly press the ON/OFF button.
“RF Mute Off” appears on the display panel.
̈ Press the multi-function switch.
The transmission icon ብ is displayed again. The radio
microphone transmits an RF signal.
̈ Keep the ON/OFF button ¹ pressed until “OFF” appears on
the display panel. The red ON LED ¾ goes off and the display
panel turns off.
When in the operating menu, pressing the ON/OFF button ¹ will
cancel your entry (ESC function) and return you to the current
standard display.
MHz
543.200
**2000**
MUTE
P
AF
ብ
ON/OFF
ON/OFF