Filter
Top Products
26
Adjusting settings via the operating menu
Activating/deactivating the pilot tone transmission –
“Pilot Tone”
The radio microphone adds an inaudible signal, known as the pilot tone, to
the transmitted signal. The receiver detects and evaluates the pilot tone.
The pilot tone supports the receiver’s squelch function, thus protecting
against interference due to RF signals from other devices.
Adjusting the contrast of the display panel – “LCD Contrast”
You can adjust the contrast of the display panel in 16 steps.
Resetting the settings made in the operating menu – “Reset”
When resetting the settings made in the operating menu, only the
selected settings for the pilot tone and for the frequency banks “U1” to
“U6” remain unchanged. For an overview of the factory-preset default
settings, refer to the enclosed frequency information sheet.
Displaying the software revision – “Software Revision”
You can display the current software revision of the radio microphone.
̈ For information on software updates, visit the SKM 2000 product page
on our website at www.sennheiser.com.
Name
Advanced
Menu
Pilot Tone
Active
Active
Pilot
Inactive
Pilot
“Stored”
Call up
“Pilot Tone”
Select the desired
setting
Store the setting
Advanced
Menu
Reset Yes
Reset
“Stored”
Select the desired
setting; apply the
setting
Call up “Reset”