Filter
Top Products
25
Entering a name – NAME
Via the “NAME” menu, you can enter a freely selectable name for
the radio microphone. This name can be displayed on the standard
display and can consist of up to six characters such as:
y letters (without pronounciation marks),
y numbers from 0 to 9,
y special characters and spaces.
After you have changed to the setting mode of the “NAME” menu,
the first segment starts flashing on the display.
Adjusting the microphone sensitivity – ATTEN
Via the “ATTEN” menu, you can adjust the radio microphone’s
sensitivity by changing its input attenuation.
̈ Slide the multi-function switch
¶
to the position ̆ (UP) or ̄ (DOWN)
to select a character.
(By sliding the switch only once, the
display jumps either forwards or
backwards to the next character. If
you keep the switch slid, the display
starts cycling continuously.)
̈ Press the multi-function switch
¶
(switch position țSET) to change to
the next segment.
̈ Have you entered the name
completely? Press the multi-
function switch
¶ (switch position
ț
SET) to store your setting.
“STORED” appears on the display
panel.
The input attenuation is correctly
adjusted when the level display for audio
signal “AF”
ቩ shows full deflection only
during the loudest passages. The input
attenuation can be adjusted in 1-dB steps
from –40dB to 0dB.
SET
DOWN
UP
¶
dB
AF
RF
ቩ
SKM 5200_512717_0506_Sp6.book Seite 25 Donnerstag, 7. Dezember 2006 3:28 15