Filter
Top Products
10
Preparing the radio microphone for use
Inserting, removing and changing the power pack
For powering the radio microphone, you can either use the
Sennheiser B 5000 battery box (1.5 V AA size batteries) or the
rechargeable Sennheiser BA 5000 battery pack. For regular use,
we recommend using the environmentally friendly rechargeable
BA 5000 battery pack.
Note:
For battery pack operation of the radio microphone, only use
the BA 5000 battery pack in order to ensure optimum
operational reliability. Batteries and rechargeable battery cells
have different discharging curves. The radio microphone is
able to identify the BA 5000 battery pack and to use its
capacity to the full. Individual rechargeable battery cells in the
B 5000 battery box will not be identified as battery packs.
Note:
After you have changed the power pack, the radio microphone
continues operating on exactly the same settings as before the
change. Stored settings are retained in memory on switch-off.
̈ To insert the power pack, open the
locking mechanism
¿ by moving it
in the direction of the arrow.
̈ Insert the power pack into the radio
microphone.
̈ Push the power pack towards the
microphone head.
̈ Close the locking mechanism
¿ by
moving it in the direction of the
arrow.
̈ To remove the power pack, open the
locking mechanism
¿ by moving it
in the direction of the arrow.
̈ Push the power pack towards the
antenna.
You can now remove the power
pack.
¿
¿
¿
SKM 5200_512717_0506_Sp6.book Seite 10 Donnerstag, 7. Dezember 2006 3:28 15