18
Specifications
AUDIO
Frequency response 20 Hz to 20 kHz ± 0.5 dB
(with LINE OUT, 1 kHz reference)
T.H.D 0.01 % or less (LINE OUT, 1 kHz)
S/N ratio 94 dB or more (LINE 3, LINE 4, IHF-A)
Crosstalk –85 dB or less (between LINE channels,
1 kHz with input cutoff)
Equivalent input noise level
–124 dBu or less (–60 dBu, with input
terminated in 150 Ω, IHF-A)
0 dBu = 0.775 V
VIDEO/S VIDEO
Frequency response 50 Hz to 10 MHz
COMPONENT/RGB
Frequency response 50 Hz to 150 MHz
480 p, 1080 i,
1280 × 1024 60 Hz (SXGA) supported
Input Terminal shape Circuit Channel Reference input level Maximum input level Impedance
MIC 1/WL 1,
MIC 2/WL 2, XLR 3-31type
∗
Balanced Monaural –60 to –45 dBu –37 to –22 dBu 2.2 kΩ or more
MIC 3, MIC 4
MIC 5/LINE 1
XLR 3-31type
∗
Balanced Monaural
–60 to –45 dBu –37 to –22 dBu 2.2 kΩ or more (in MIC mode)
MIC 6/LINE 2 –10 to +4 dBu +10 to +24 dBu 10 kΩ (in LINE mode)
LINE 3 Pin Unbalanced Stereo –10 to 0 dBu +10 dBu 10 kΩ or more
LINE 4 (A B C F) Pin Unbalanced Stereo –10 to 0 dBu +10 dBu 10 kΩ or more
LINE 4 (D E) Pin Unbalanced
Stereo/
–10 to 0 dBu +10 dBu 10 kΩ or more
5.1 surround
Output Terminal shape Circuit Channel
Reference output level Maximum output level
Load impedance
LINE OUT 1-2 XLR 3-32type
∗
Balanced Monaural –10/–5/0/+4 dBu +24 dBu 600 Ω or more
LINE OUT 3-8 Pin Unbalanced Monaural –10/–5/0 dBu +15 dBu 10 kΩ or more
REC OUT 1-2 Pin Unbalanced Monaural –10/–5/0 dBu +15 dBu 10 kΩ or more
Output Terminal shape Impedance Maximum output
CH 1 4 Ω to 16 Ω 150 W + 150 W (8 Ω 1 kHz, T.H.D 10%)
CH 2 Screw-type terminal 4 Ω to 16 Ω 200 W + 200 W (4 Ω 1 kHz, T.H.D 10%)
70 V LINE 32 Ω to 10 kΩ 150 W (32 Ω 1 kHz, T.H.D 10%)
Input Terminal shape Signal format Level Impedance
LINE 4 (A B C)
Pin Composite 1 Vp-p (75Ω) 75 Ω
MINI Din Y/C 1 Vp-p (Y)/0.286 Vp-p (C) 75 Ω
LINE 4 (D E F) HD D-sub 15-pin Component/RGB
0.7 Vp-p (video signal) 75 Ω (video signal)
1 to 5 V (sync signal) 47 kΩ (sync signal input)
Output Terminal shape Signal format Level Impedance
R/R-Y, G/Y, B/B-Y,
BNC Component/RGB
0.7 Vp-p (video signal) 75 Ω (video signal)
SYNC/HD, VD 1 to 5 V (sync signal) 47 kΩ (sync signal input)
S VIDEO MINI Din Y/C 1 Vp-p (Y)/0.286 Vp-p (C) 75 Ω
VIDEO BNC Composite 1 Vp-p 75 Ω
AUDIO INPUT/OUTPUT
SPEAKERS OUTPUT
VIDEO/RGB INPUT/OUTPUT
REMOTE
PROJECTOR CONTROL
RS-232C D-sub 9-pin (male)
CONTROL S IN/OUT Mini jack
REMOTE
PARALLEL I/O D-sub 25-pin (female)
IN Make contact input
Logic: C-MOS LEVEL active L
Input pulse width: 100 msec or more
OUT Open collector output
Withstand voltage: +24 V or less
Maximum sink current: 40 mA
RS-232C D-sub 9-pin (male)
USB (front/rear) TYPE-B
OTHERS
ANT IN terminal BNC DC +9 V is supplied.
+48 V power supply Supplied to MIC 1 to MIC 6 XLR
terminals. (For MIC 1 to MIC 4,
supplied when the +48 V button is
ON.)
(For MIC 5 and MIC 6, supplied at
MIC level setting only.)
∗ Pin-1: GND Pin-2: HOT Pin-3: COLD
When ATT is set to 0 dB, 150 W + 150 W (across 8 Ω) power is output at the 0 VU setting of the output signal level.