Filter
Top Products
6
GoldMike MK2
Rear Panel/Connections
Wiring
RETURN
SERIAL NUMBER
GoldMike 2
4860000
Sound Performance Lab
XLR Wiring:
Pin 1 = GND, Pin 2 = (+), Pin3 = (–)
TRS Jack Wiring:
Tip = (+), Ring = (–), Sleeve = GND
Mono Jack Wiring:
Tip = (+), Sleeve = GND
WARNING
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK DO
NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
DISCONNECT MAINS BEFORE REMOVING COVER.
THIS EQUIPMENT MUST BE EARTHED.
220 – 240 V~50 Hz
110 – 120 V~60 Hz
MADE IN GERMANY
MIC INPUT 2
MIC INPUT 2
LINE IN 2
LINE IN 2
Mono Jack:
Unbal. 0dB
Mono Jack:
Unbal. 0dB
OPTICAL
SPDIF SPDIF
x2
48
44,1
24/96 AD
Converter
DIGITAL OUTPUTSSYNC INPUT
SAMPLE RATE
INPUT OUTPUT OUTPUT
SYNC
LOCK
Model
2376
Made in
Taiwan
GND LIFT
RETURNSEND
TRS Jacks: Balanced +4dB
Use Mono Jacks for Unbal. Operation
TRS Jacks: Balanced +4dB
Use Mono Jacks for Unbal. Operation
XLR &TRS Jack: Balanced +4dB
Use Mono Jacks for Unbal. Operation
XLR &TRS Jack: Balanced +4dB
INSERT 2
INSERT 2
SEND
OUTPUTS 2
OUTPUTS 2 VOLTAGE
VOLTAGE
220 – 240 V~50 Hz:
315 mA slow
110 – 120 V~60 Hz:
630 mA slow
MIC INPUT 1
MIC INPUT 1
LINE IN 1
LINE IN 1
GND LIFT
GND LIFT
INSERT 1
INSERT 1
OUTPUTS 1
OUTPUTS 1
FUSE RATING
AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
SPL electronics GmbH
Niederkrüchten, Germany
www.soundperformancelab.com
Use Mono Jacks for Unbal. Operation
Pin wiring of
XLR outputs
1=Ground, 2=hot(+), 3=cold(-)
PUSH
2
1
3
Pin wiring of
XLR mic inputs
1=Ground, 2=hot(+), 3=cold(-)
Pin wiring
of TRS connectors
Tip=hot(+), Ring=cold(-), Sleeve=Ground
S/P-DIF signal
for external synchronization
Optional A/D converter, model 2376
S/P-DIF signal to DAW,
HD recorder etc.
MicrophoneLine signals*Converter, recorder, consoleEffects (EQs etc.)
* For signals with impedances lower than 1kOhms, i. e. D/A converters, synths, samplers.
Instruments with impedances above 1kOhms are to be connected to the instrument input on the front (see input descriptions on pages 8 and 9).
1
2
3