Filter
Top Products
Transient Designer
16
Input & Output
Instrumentation amplifier, electronically balanced (differential),
transformerless
Nominal input level ...................................... +6dB
Input impedance .......................................... = 22kOhms
Output impedance ...................................... < 600Ohms
Max.input level .............................................. +24 dBu
Max.output level .......................................... +22,4 dBu
Minimum load ohms ................................... 600Ohms
Relay Hard Bypass / Power Fail Safety
Measurements
Frequency response ..................................... 20 Hz - 100 kHz
... (100 kHz = -3 dB)
CCMR (common mode rejection)............. - 87 dBu @ 100 Hz
... - 80dBu @ 1kHz
.. - 75dBu @ 10kHz
. - 70dBu @ 20 kHz
THD & N ............................................................ 0,004 % @ 1kHz
S/N CCIR 468-3 .............................................. -89dBu
S/N A-weightened ....................................... -105dBu
Power Supply
Torroidal transformer................................... 15 VA
Fuses (230V / 115 V) .................................... 200 mA /400 mA
Ground-Lift switch,Voltage selector
Dimensions
Housing ............................................................ Standard EIA 19"/1U,
... 482 x 44,45 x 237mm
Weight .............................................................. 3,4 kg
Note:0 dBu = 0.775V.Subject to change without notice.
Specifications