Filter
Top Products
TASCAM DR-680
49
9 – Other Settings and Information Display
Digital output settings
You can set the digital output format to SPDIF or AES/EBU.
1. Press the MENU button to open the
I/O
page of the
MENU
screen.
2. Use the DATA wheel to select the
DIGITAL OUT
menu
item, and press the ENTER/MARK button.
3. Use the DATA wheel to select
SPDIF
(default value) or
AES/EBU
.
SPDIF
: Output in SPDIF format.
AES/EBU
: Output in AES/EBU format.
4. When you have finished making the setting, press the
HOME/DISP button to return to the Home Screen.
System settings
Use the
SYSTEM
page to make various settings to suit
the environment and conditions in which the unit is to be
used, as well as to view system information.
1. Press the MENU button to open the
SYSTEM
page of
the
MENU
screen.
On the
SYSTEM
menu screen, you can make various
settings described below.
Use the MARK (Â) and (¯) buttons, ENTER/
MARK button and the DATA wheel to select each item.
2. When you have finished making the settings, press the
HOME/DISP button to return to the Home Screen.
Power AUTO OFF settings
Use the
AUTO
OFF
item to set the amount of time since
being last used until the unit’s power automatically turns
OFF when operating on batteries.
Options:
OFF
(default value—AUTO OFF disabled),
3min
,
5min
,
10min
,
30min
Turning the backlight off automatically
Use the
BACKLIGHT
item to set the amount of time since
being last used until the backlight automatically turns OFF
when operating on batteries.
Options:
OFF
,
5sec
(default value),
10sec
,
15sec
,
30sec