Tascam M-164FX Music Mixer User Manual


 
TASCAM M-164/M-164FX/M-164UF
27
5 − Using with a Computer (M-164UF)
When installing the driver, start with the M-164UF mixer
disconnected.
CAUTION
Handle the enclosed CD-ROM with care. If the disc
becomes scratched or dirty, your computer may be
unable to read it and you may be unable to install the
software.
If the disc becomes unreadable, you can request a
replacement disc for a fee.
Do not try to play the included CD-ROM disc on an
ordinary audio CD player. The noise produced could
damage the speakers or harm your hearing.
Installing the drivers for Windows
The US-1641’s drivers are provided on the CD-ROM as an
executable installer.
You can also download the latest version of the driver from
the TASCAM website (www.tascam.com).
If the driver on the included CD-ROM is an older version,
we recommend that you download the latest version and
install it
Installation procedures
The following are detailed explanations (for a Windows
XP system) of how to install the driver from the included
CD-ROM and how to update the firmware.
CAUTION
When installing the driver, it is necessary to disconnect
and reconnect the USB cable during steps 7, 8 and 9.
During this time, complete the procedures indicated on
the screen within about a minute. Failure to complete
the procedures quickly could result in the installation
failing.
Installing the drivers
1 Make sure that the unit (M-164) is not connected to
your computer via a USB cable.
2 Insert the included driver installation CD-ROM into
the CD-ROM drive on your computer.
3 Click the Install M-164 Driver button when the menu
screen below appears.
If the menu screen does not appear, find and open
the “M-164UF_Install.exe” file on the driver.
4 When the language selection screen appears after a
short time, use the up and down arrow keys to select
the desired language and then click the “OK” but-
ton.
When the screen below appears, click the
5
Install the driver button.