Filter
Top Products
Operating Basics
80E00 Electrical Sampling Modules User Manual
15
WARNING. To pr event injury, power down the instrument and disconnect it from
line voltage before performing any cleaning.
Clean the exterior surfaces of the module with a dry, lint-free cloth or a soft-
bristle brush. If any dirt remains, use a damp cloth or swab dipped in a 75%
isopropyl alcohol solution. Use a swab to clean narrow spaces around controls
and connectors. Do not allow moisture inside the module. Do not use abrasive
compounds on any part of the chassis, as they may damage it.
CAUTION. To prevent damage, avoid the use of chemical cleaning agents that
might damage the plastics used in this instrument. Use a 75% isopropyl alcohol
solution as a cleaner and rinse with deionized water. Use only deionized water
when cleaning the menu buttons or front-panel buttons. Before using any other
type of cleaner, consult your Tektronix Service Center or representative.
Do not open the case of the module. There are no user serviceable components
and cleaning the interior is not required.