Filter
Top Products
Q2 OPERATION AND MAINTENANCE MANUAL 9601 36
Either 8 or 16 mono subgroup modules may be fitted in Q2. If 16
are fitted, routing is paired, with active pan across the group buses
at all times. For 8 modules, routing is individually selected, with
pan only switched in across odd and even groups as required.
The module comprises the group control and output (lower part of
module) and a matrix mixer section (upper part of module).
Each module has controls for inputs to the Matrix mixer, ie they are
not feeds from that group to the matrix buses, but feeds from the
groups etc to the matrix.
F/B 1/3
Adjusts the level of the Foldback 1 master output (or 3) fed to the
Matrix bus on the module. This may be used to feed a global mix
set-up on the F/B 1 bus to any of the 8 matrix outputs.
F/B 3 (switch)
Selects the Foldback output 3 to the matrix instead of F/B 1.
F/B 2/4
Adjusts the level of the Foldback 2 master output (or 4) fed to the
Matrix bus on the module.
F/B 4 (switch)
Selects the Foldback output 4 to the matrix instead of F/B 2.
L/R
Adjusts the level of the summed (mono) signal from the main
stereo left and right outputs fed to the Matrix on the module.
MONO
Adjusts the level of the main Mono (centre) signal from the main
mono output fed to the Matrix on the module.
1
Adjusts the level of the post-fader Group 1 signal input to the
Matrix. Similarly for Controls 2-8 for Group signals 2 to 8.
MONO SUBGROUP OUTPUT MODULE