Filter
Top Products
Q2 OPERATION AND MAINTENANCE MANUAL 9601 4
GENERAL
INFORMATION
Three channel or Left, Centre, Right panning differs from the
normal stereo panning arrangement in that where the conventional
left/right pan moves the signal across the stereo image, LCR
panning moves the mono signal across three distinct positions.
Using LCR panning gives a more spatial effect, offers more control
over vocal and effects positioning, and brings theatre performances
to life in a way that conventional stereo panning cannot.
In the LCR mode, the pan pot acts as follows. When panned hard
left, the signal is only fed to the left channel of the main output (or
sub-group). As the pan is rotated towards the centre, the signal to
the left decreases, and the signal to the centre channel increases
until at dead centre the signal only goes to the centre output. At
this point, no signal is fed to the right channel at all.
LEFT CENTRE RIGHT
Rotating the pan pot further (to the right) decreases the centre feed
while the right feed increases until at full clockwise rotation the
signal is only on the right channel.