Filter
Top Products
Q2 OPERATION AND MAINTENANCE MANUAL 9601 40
Eight stereo subgroup modules may be fitted in Q2, and routing is
individually selected.
The module comprises the Stereo Group control and output (lower
part of module) and a Stereo Matrix mixer section (upper part of
module). Each module has controls for inputs to the Stereo Matrix
mixer ie they are not feeds from that Group to the Matrix buses, but
feeds from the Groups etc to the Matrix.
F/B 1/3
Adjusts the level of the Foldback 1 master output (or 3) fed to the
Stereo Matrix bus on the module. This may be used to feed a global
mix set-up on the F/B 1 bus to any of the 8 Stereo Matrix outputs.
The control is a dual-concentric pair with Level and Pan adjust
across the Stereo Matrix.
F/B 3 (switch)
Selects the Foldback output 3 to the matrix instead of F/B 1.
F/B 2/4
Adjusts the level of the Foldback 2 master output (or 4) fed to the
Matrix bus on the module. The control is a dual-concentric pair
with Level and Pan adjust across the Stereo Matrix.
F/B 4 (switch)
Selects the Foldback output 4 to the matrix instead of F/B 2.
L/R
Adjusts the level of the main Stereo Left and Right outputs fed to
the Stereo Matrix on the module.
MONO
Adjusts the level of the main Mono (centre) signal from the main
Mono output fed to both sides of the Stereo Matrix on the module.
1
Adjusts the level of the post-fader Stereo Group 1 signal input to
the Stereo Matrix. Similarly for Controls 2-8 for Group signals 2 to
8.
STEREO SUBGROUP OUTPUT MODULE